Beschreibung
Merkmale:
LFC-309LMo is a modified type of LFC-309L with the addition of molybdenum. It designed for 100% CO₂ gas and all-position welding. It performs with smooth arc transfer, low spatter level, fast freezing slag and, good heat and corrosion resistance.
Anwendungen:
It is suitable for weldingstainless steel to unalloyed steel. It is also used for buffer layers of clad steels.
Hinweise zur Verwendung:
1. Use 100% CO₂ shielding gas.
2. Use DC(+) polarity.
3. Trailer Shield is required to ensure the weld pool completely shield until solidification is complete and no porosity problem.
4. To get enough penetration in the down hand welding position recommend maintaining a higher welding speed.
Einstufung:
AWS A5.22 E309LMoT1-1
EN EN12073 T 23 12 L P C 2
Welding Position:
Typische chemische Zusammensetzung des Schweißguts (wt%)
| C | Mn | Si | P | S | Cr | Ni | Mo |
| 0.025 | 1.5 | 0.57 | 0.023 | 0.01 | 22.93 | 12.7 | 2.35 |
Typische mechanische Eigenschaften des Schweißguts
| TS N/mm² | EL % |
| 685 | 33 |
Größen und empfohlener Strombereich ( DC+)
| Durchmesser (mm) | 1.2 | |||
| Position beim Schweißen | F, HF | H | V-UP | OH |
| Spannung (Volt) | 24-33 | 25-29 | 24-28 | 25-29 |
| Stromstärke (Ampere) | 130-220 | 140-180 | 130-160 | 150-180 |
| Herausragen(mm) | 15-20 | 15-20 | 15-20 | 15-20 |
| Durchflussmenge (l/min) | 20-25 | 20-25 | 20-25 | 20-25 |
| Gewicht pro Spule (kg) | 12.5 | |||
