Beschreibung
Merkmale:
LSW-NiCrMo-10 is a nickel based low hydrogen type solid wire which good corrosionresistance against acetic acid and its anhydride, hot contaminated sulphuric and phosphoric acids and other contaminated oxidizing mineral acids. Intermetallic precipitation is widely prevented.
Anwendungen:
For welding the cladded side of plates of matching and similar alloys. High corrosion resistance in reducing and oxidizing environments.
Hinweise zur Verwendung:
1. Dry the flux at 350℃ for 60 minutes before use
2. Not recommended to welding more than two passes.
Einstufung:
AWS A5.14 ERNiCrMo-10
Typische chemische Zusammensetzung des Schweißguts (wt%)
| C | Mn | Mo | Ni | Cr | W | Fe |
| 0.01 | 0.4 | 13.00 | Bal. | 22.60 | 2.5 | 2 |
Typische mechanische Eigenschaften des Schweißguts
| YP N/mm2 | TS N/mm2 | EL % |
| 620 | 700 | 30 |
Größen und empfohlener Strombereich ( DC+)
| Wire: Diameter (mm) | 2.4 | 3.2 | 4.0 |
| Wire: Weight per roll (kg) | 25 | 25 | 25 |
| Flux: Weight per bag(kg) | 25 | 25 | 25 |
