Deskripsi
Karakteristik:
LFC-711M is a flux-cored wire design to be use with Ar/CO₂ gas. It can be used on all-position welding with both single and multiple pass welds on mild steels and 490N/mm² high tensile steel. With good impact toughness, less fume, stable arc, easy slag removal and excellent X-Ray inspection.
Aplikasi:
It is widely used for shipbuilding, storage vessels, structural fabrication, machinery and piping etc.
Catatan tentang Penggunaan:
1. Use DC(+) polarity.
2. Use 75-85%Ar + 25-15%CO₂ as shielding gas.
3. In order to get enough penetration in the down hand weld position, maintain a little bit higher welding speed by stringer manipulation for the first pass.
Klasifikasi:
AWS A5.20 E71T-1M/9M
EN EN758 T 46 2 P M 1 H10
JIS Z3313 YFW-A502R
Welding Position:
Komposisi kimiawi khas logam las (wt%)
| C | Mn | Si | P | S |
| 0.05 | 1.25 | 0.45 | 0.015 | 0.007 |
Sifat mekanis khas dari logam las
| YP N/mm² | TS N/mm² | EL % | IV -29°C J |
| 540 | 590 | 28 | 95 |
Ukuran dan rentang arus yang disarankan (DC+)
| Diameter (mm) | 1.2 | 1.6 |
| Tegangan (Volt) | 25-40 | 25-40 |
| Arus (Amp) | 130-300 | 200-400 |
| Menonjol (mm) | 15-25 | 20-30 |
| Laju aliran (l/menit) | 15-25 | 20-25 |
| Berat per gulungan (kg) | 15 | 15 |
