説明
特徴
LFC-711Ni is a flux-cored wire design to be use with CO₂ gas. It can be used on all-position welding on 490N/mm² high tensile steel. With stable arc, less spatter, easy slag removal and excellent X-Ray inspection. It provides good low-temperature impact value due to 0.4%Ni in weld metal.
アプリケーション
It is widely used for shipbuilding, vessels, piping, off-shore plateform, low temperature service storage tanks, etc.
使用上の注意
1.DC(+)極性を使用してください。
2. Use CO₂ as shielding gas.
3. In order to get enough penetration in the down hand weld position, maintain a little bit higher welding speed by stringer manipulation for the first pass.
4. Keep dry during handling and storage.
分類
AWS A5.20 E71T-1CJ/9CJ
EN EN758 T 42 4 P C 1
溶接のポジション
典型的な溶接金属の化学成分 (wt%)
| C | ムン | Si | P | S | ニー |
| 0.05 | 1.35 | 0.43 | 0.018 | 0.009 | 0.45 |
溶接金属の代表的な機械的性質
| YP N/mm² | TS N/mm² | EL % | IV -40°C J |
| 515 | 575 | 29 | 80 |
サイズと推奨電流範囲 ( DC+)
| 直径 (mm) | 1.2 | 1.6 |
| Voltage (Volt) | 25-32 | 25-40 |
| Current (Amp) | 130-300 | 200-400 |
| Stick out (mm) | 15-25 | 20-30 |
| Flow rate (l/min) | 15-25 | 20-25 |
| Weight per spool (kg) | 15 | 15 |
