描述
特性：
LFC-711Ni is a flux-cored wire design to be use with CO₂ gas. It can be used on all-position welding on 490N/mm² high tensile steel. With stable arc, less spatter, easy slag removal and excellent X-Ray inspection. It provides good low-temperature impact value due to 0.4%Ni in weld metal.
應用：
It is widely used for shipbuilding, vessels, piping, off-shore plateform, low temperature service storage tanks, etc.
使用注意事項：
1. Use DC(+) polarity.
2. Use CO₂ as shielding gas.
3. In order to get enough penetration in the down hand weld position, maintain a little bit higher welding speed by stringer manipulation for the first pass.
4. Keep dry during handling and storage.
分類：
AWS A5.20 E71T-1CJ/9CJ
EN EN758 T 42 4 P C 1
焊接位置：
焊接金屬的典型化學成分 (wt%)
| C | 錳 | Si | P | S | 倪 |
| 0.05 | 1.35 | 0.43 | 0.018 | 0.009 | 0.45 |
焊接金屬的典型機械特性
| YP N/mm² | TS N/mm² | EL % | IV -40°C J |
| 515 | 575 | 29 | 80 |
尺寸與建議電流範圍 ( DC+)
| 直徑 (mm) | 1.2 | 1.6 |
| 電壓 (伏特) | 25-32 | 25-40 |
| 電流 (安培) | 130-300 | 200-400 |
| 伸出 (mm) | 15-25 | 20-30 |
| 流量 (l/min) | 15-25 | 20-25 |
| 每卷重量（公斤） | 15 | 15 |
