説明
特徴
Good corrosion-resistance against acetic acid and its anhydride, hot contaminated sulphuric and phosphoric acids and other contaminated oxidizing mineral acids. Intermetallic precipitation is widely prevented.
アプリケーション
For joining materials of the same and similar nature, e.g. material-no. 2.4602 (NiCr21Mo14W / UNS N06022) and special stainless steels. Furthermore it can be used for dissimilar joints of these alloys with low-alloyed materials and cladding
使用上の注意
1.Dry the electrode at 350-400°C for 60 minutes before use.
2.Keep the arc as short as possible.
3.Crater should be ground smooth or crater treatment.
分類
AWS A5.11 ENiCrMo-10
溶接の位置
典型的な溶接金属の化学成分 (wt%)
| C | ムン | Si | Cr | モ | ニー | S | W | フェ |
| 0.018 | 0.28 | 0.19 | 22.47 | 14.00 | 54.26 | 0.002 | 3.21 | 5.14 |
溶接金属の代表的な機械的性質
| TS N/mm² | EL % | IV -30°C J |
| 770 | 40 | 70 |
サイズと推奨電流範囲（ACまたはDC+)
| 直径 (mm) | 2.6 | 3.2 | 4.0 | 4.8 | |
| 長さ (mm) | 300 | 350 | 350 | 350 | |
| アンペア | F | 90-120 | 120-160 | 160-220 | 230-300 |
| V&OH | 70-110 | 80-120 | 110-150 | 230-300 | |
| パックあたりの重量（kg） | 5 | 5 | 5 | 5 | |
| カートンあたりの重量（kg） | 20 | 20 | 20 | 20 | |
